POLLUTEv7 for WINDOWS
Order No: TPS 67
50%
academic discount available
The
POLLUTEv7 software provides fast, accurate, and comprehensive contaminant
migration analysis capabilities. This program implements a one and a half
dimensional solution to the advection-dispersion equation.
Landfill
designs that can be considered range from simple systems on a natural clayey
aquitard to composite liners, multiple barriers and multiple aquifers.
In
addition to advective-dispersive transport, POLLUTE can consider adsorption,
radioactive and biological decay, and transport through fractures.
With more then fifteen years utilization in industry, POLLUTEv7 is a well tested contaminant migration analysis program which is widely used in landfill design and remediation. Landfill designs that can be considered range from simple systems on a natural clayey aquitard to composite liners, multiple barriers and multiple aquifers.
In addition to advective-dispersive transport, POLLUTEv7 can consider:
* radioactive and biological decay and non-linear sorption
* transport through fractures
* passive sinks
* phase changes, and
* time-varying properties.
The program comes in two editions, Professional and Standard. The Professional edition is best suited for landfill design and the Standard edition is best suited for environmental remediation. Below is a comparison of the two versions:
| Feature | Professional | Standard |
| Wizards and pre-created models | Yes |
Yes |
| Unlimited number of models | Yes | Yes |
| Up to 200 layers | Yes | Yes |
| Constant concentration boundary conditions | Yes | Yes |
| Fixed outflow boundary condition | Yes | Yes |
| Finite mass boundary condition | Yes | Yes |
| Passive Sinks | Yes | Yes |
| Linear sorption | Yes | Yes |
| Non-linear sorption | Yes | No |
| Fractures in layers | Yes | No |
| Radioactive and biological decay | Yes | No |
| Initial concentration profile | Yes | No |
| Time-varying properties | Yes | No |
| Monte Carlo Simulation | Yes | Yes |
| Sensitivity Analysis | Yes | Yes |
The new Windows Interface makes
the creation, editing, execution, printing and displaying of models very easy
and flexible. Models can be created from scratch, using the program Wizard
or by selecting one of the many pre-created models.