ASPPRC (Advanced Steel Processing and Products Rresearch Center) Forging Paper Reprints. To obtain copies see bottom of page.
Microalloyed Steels
M. Leap, E.L. Brown, P. Mazzare, and G. Krauss: "The Evolution of Microstructure and Precipitate Dispersions During Reheating in a Vanadium Modified 1045 Steel", in Fundamentals of Microalloying Forging Steels, Edited by G. Krauss and S.K. Banerji, TMS, Warrendale, PA, 1987, pp. 91-112.
M. Leap, D.K. Matlock, and G. Krauss: "Correlation of the Charpy Test to Fracture Mechanics in a Vanadium Modified 1045 Steel", in Fundamentals of Microalloying Forging Steels, Edited by G. Krauss and S.K. Banerji, TMS, Warrendale, PA, 1987, pp. 113-154.
G. Krauss: "Microalloyed Bar and Forging Steels", in Proceedings of 29th Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1987, pp. 67-77.
J. Dyck, W.E. Heitmann, D. Bhattacharya, R.H. Frost, D.K. Matlock, and G. Krauss: "Effects of Hot Reduction and Bar Diameter on Torsional Fatigue of a Strand Cast Microalloyed Steel", in Proceedings of 30th Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1988, pp. 83-94.
S.W. Thompson and G. Krauss: "Precipitation and Fine Structure in Medium-Carbon Vanadium and Vanadium/Niobium Microalloyed Steels", Metallurgical Transactions A, vol. 20A, 1989, pp. 2279-2288.
K. Grassl, S.W. Thompson, and G. Krauss: "New Options for Steel Selection for Automotive Applications", SAE Technical Paper Series No. 890508, SAE, Warrendale, PA, 1989.
K.J. Grassl, S.W. Thompson, D.K. Matlock, and G. Krauss: "Toughness of MediumCarbon Forging Steels with Direct Cooled Bainitic Microstructures", in Proceedings of 31st ISS Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1990, pp. 137-143.
L.A. Touryan, S.W. Thompson, D.K. Matlock, and G. Krauss: "Microstructure and Properties of Medium-Carbon Steels Microalloyed with Vanadium and Niobium", in Proceedings of International Symposium on Microalloyed Bar and Forging Steels, Edited by M. Finn, Canadian Institute of Mining and Metallurgy, Montreal, Quebec, 1990, pp. 63-83.
P.A. Oberly, C.J. Van Tyne, and G. Krauss: "Grain Size and Forgeability of a Titanium Microalloyed Forging Steel", SAE Technical Paper Series No. 910146, SAE, Warrendale, PA, 1991.
B.G. Kirby, P. LaGreca, C.J. Van Tyne, D.K. Matlock, and G. Krauss: "Effect of Sulfur on Microstructure and Properties of Medium-Carbon Microalloyed Bar Steels", SAE Technical Paper Series No. 920532, SAE, Warrendale, PA, 1992.
P.T. Mazzare, S.W. Thompson, and G. Krauss: "Microalloying and Austenite Grain Size Control: Implications for Direct-Cooled Forgings", in Proceedings of International Conference on Processing, Microstructure, and Properties of Microalloyed and Other Modern High Strength Low Alloy Steels, Edited by A.J. DeArdo, ISS, Warrendale, PA, 1993, pp. 497-509.
B.G. Kirby, C.J. Van Tyne, D.K. Matlock, R. Turonek, R.J. Filar, and G. Krauss, "Carbon and Sulfur Effects on Performance of Microalloyed Spindle Forgings", SAE Technical Paper Series No. 930966, SAE, Warrendale, PA, 1993.
N.E. Aloi, G. Krauss, C.J. Van Tyne, and Y.W. Cheng, "The Effect of Forging Conditions on the Flow Behavior and Microstructure of a Medium Carbon Microalloyed Forging Steel", SAE Technical Paper Series No. 940787, SAE, Warrendale, PA, 1994.
A.J. Nagy, G. Krauss, D.K. Matlock, and S.W. Thompson, "The Effect of Silicon and Retained Austenite on Direct-Cooled Microalloyed Forging Steels with Non-Traditional Bainitic Microstructures", in Proceedings of 36th Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1994, pp. 271-277.
N.E. Aloi, G. Krauss, C.J. Van Tyne, D.K. Matlock, and Y.-W. Cheng, "Hot Deformation Microstructure and Properties of Medium-Carbon Microalloyed Forging Steels", in Proceedings of 36th Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1994, pp. 201-213.
P.T. Purtscher, Y.-W. Cheng and R.P. Foley, "Prediction of the Strength Properties for Plain-Carbon and Vanadium Microalloyed Ferrite-Pearlite Steel" in Proceedings of 36th Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1994, pp. 279-288.
A.J. Bailey, G. Krauss, S.W. Thompson, and W.A. Szilva, "The Effect of Silicon and Retained Austenite on Direct-Cooled Microalloyed Forging Steels with Bainitic Microstructures", Proceedings of 37th Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1996, pp. 455-462.
G.T. Velarde, C.J. Van Tyne, and Y.-W. Cheng, "Hot Deformation Behavior of Several Microalloyed Forging Steels", Fundamentals and Applications of Microalloyed Forging Steels, edited by C.J. Van Tyne, G. Krauss, and D.K. Matlock, TMS, Warrendale, PA, 1996, pp. 209-224.
J. Cunningham, D.J. Medlin, C.J. Van Tyne, and G. Krauss, "Induction Hardening of Microalloyed Medium-Carbon Steel: Characterization of Pre-Hardened Microstructure", Fundamentals and Applications of Microalloyed Forging Steels, edited by C.J. Van Tyne, G. Krauss, and D.K. Matlock, TMS, Warrendale, PA, 1996, pp. 491-505.
N.E. Aloi, "Hot Deformation, Microstructure, and Property Analysis of Ferritic/Pearlitic and Bainitic Microalloyed Forging Steels - Winner of the 1995 Silver Anvil Award in the Graduate Division", Forging, Fall 1996, pp. 41-44.
J.L. Cunningham, D.J. Medlin and G. Krauss, "Effects of Induction Hardening and Prior cold Work on a Microalloyed Medium Carbon Steel", in Proceedings of 1st International Induction Heat Treating Symposium, ASM International, Materials Park, OH, 1997, pp. 575-583.
Superalloys
M. Mataya, M. Robinson, D. Chang, M. Weis, G. Edwards, and D.K. Matlock: "Grain Refinement of Alloy 718", in Proceedings of 29th Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1987, pp. 235-247.
M.J. Weis, M.C. Mataya, S.W. Thompson and D.K. Matlock: "The Hot Deformation Behavior of an As-Cast Alloy 718 Ingot", in Proceedings of Superalloy 718, Edited by E.A. Loria, TMS, Warrendale, PA, 1989, pp. 135-154.
M.C. Mataya and D.K. Matlock: "Effects of Multiple Reduction on Grain Refinement During Hot Working of Alloy 718", in Proceedings of Superalloy 718, Edited by E.A. Loria, TMS, Warrendale, PA, 1989, pp. 155-178.
M.C. Mataya, E.R. Nilsson, and G. Krauss, "Comparison of Single and Multiple Pass Compression Tests Used to Simulate Microstructural Evolution During Hot Working of Alloys 718 and 304L", in Proceedings of Superalloys 718, 625, 706, and Derivatives Symposium, Edited by E.A. Loria, TMS, Warrendale, PA, 1994, pp. 331-343.
D.R. Nielsen, S.W. Thompson, C.J. Van Tyne and M.C. Mataya, "Grain Size Control in Ring-Rolled Alloy 718", in Proceedings of Superalloys 718, 625, 706, and Derivatives Symposium, Edited by E.A. Loria, TMS, Warrendale, PA, 1994, pp. 373-392.
A.C. Perry, C.J. Van Tyne, and F.S. Suarez, "An Examination of Hot Deformation and Recrystallization of Alloy 617", Proceedings of 2nd International Conference on Heat Resistant Materials, ASM International, Materials Park, OH, 1995, pp. 267-273.
M.C. Mataya, C.A. Perkins, S.W. Thompson, and D.K. Matlock, "Flow Stress and Microstructural Evolution during Hot Working of Alloy 22Cr-13Ni-5Mn-0.3N Austenitic Stainless Steel", Metallurgical Transactions A, vol. 27A, 1996, pp. 1251-1266.
Open Die Forgings
C.J. Van Tyne, "Modeling of Open Die Forging Processes", in Proceedings of 31st ISS Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, vol. XXVII, 1990, pp. 209218.
C.J. Van Tyne and R.B. Focht, "Thermal Modeling of Open Die Forgings Using Microcomputer Programs", in Proceedings of 1994 NSF Design and Manufacturing Grantees Conference, MIT, Cambridge, MA, 1994.
C.J. Van Tyne, R.B. Focht, T.D. Nelson, and W. Reese, "Modeling of Heating Cycles for Large Forgings Using a PC-Based Program", in Proceedings of 35th Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1993, pp. 217-222.
C.J. Van Tyne, R.B. Focht, T.D. Nelson, and W. Reese, "Thermal Modeling of Large Axisymmetric Forgings", JOM, vol. 46, no. 9, September 1994, pp. 24-26.
C.J. Van Tyne and G.A. Brada, "Modeling of Heat Cycles for Large Forgings", in Proceedings of 12th International Forgemasters Meeting, Cleveland, Ohio, 1994, vol. 1, pp. 5.6-1 to 5.6-12.
G.A. Brada and C.J. Van Tyne, "Modeling of Heating and Heat Treating Cycles for Large Forgings", Industrial Heating, 1996, pp. 45-51.
Other Papers of Interest
C.J. Van Tyne and L.P. Turner, "Review of Process Modeling for Prediction of Microstructures and Properties for Metal Deformation Processes", in Proceedings of North American Forging Technology Conference, ASM International, Materials Park, OH, 1994, pp. 43-49.
E.B. Damm and C.J. Van Tyne, "Physical Simulation of Thermal/Mechanical Metal-Working Processes", in Proceedings of 37th Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1995, pp. 367-371.
E. B. Damm, C.J. Van Tyne, S.W. Thompson and D.K. Matlock, "The Effect of Hot Working Conditions on the Austenite Decomposition in SAE 4120 Steel", in Proceedings of 37th Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, 1995, pp. 819-831.
C.V. White, G. Krauss, and D.K. Matlock, "Solidification Structure and the Effects of Hot Reduction in Continuously Cast Steels for Bar and Forgings", I&SM, vol. 25, no. 9, 1998, pp. 73-79.
To request copies of the above papers please send email to: mmartin@mines.edu
Return to Forging Research and Software Page
This information has been provided by cvantyne@mines.edu. Last updated, May 1999
© 1998, Chester J. Van Tyne